INSTRUCTIONS FOR ARTICLE SUBMISSION
The Scientific Journal of Innovacion Empresarial (ISSN: 2810-8507 Online, DOI: 10.37711/rcie) is a journal published by the Faculty of Business Sciences in coordination with the Programs of Business Administration, Accounting and Finance, Marketing and International Business, Tourism, Hotel Management and Gastronomy of the University of Huanuco, Peru. It is a peer-reviewed journal, published every six months and has been published continuously since its creation in 2021. It publishes unpublished articles related to the field of social sciences, business, management and accounting; from a Latin American perspective.
The Innovacion Empresarial Journal is published since 2021 in digital format, the journal adopts the social approach in its branches of management, accounting, economics, finance, the articles are published in OJS (PDF, HTML) to give greater visibility and accessibility through its website: http://revistas.udh.edu.pe/index.php/rcie
SUBMISSION OF ARTICLES
Articles submitted to Innovacion Empresarial should be unpublished, i.e., they should not have been published or be in the process of being published in another journal. In addition, the article must not have been submitted to other journals simultaneously. Articles may be written in Spanish or English, depending on the authors' origin and/or preference. Articles should be submitted only in electronic format through our OJS system (http://revistas.udh.edu.pe/index.php/rcie/user/register) or through our e-mail address: revistainnovacionempresarial@udh.edu.pe.
The following documentation must be attached:
The article written following the guidelines for article submission detailed in these Instructions.
Authorship declaration form (Word), Affidavit (Word) and originality form (Word) respectively filled out and signed by the main author. In order for the editorial process of each article to begin, the presentation of the sworn statement, duly signed, is obligatory; if this is not done, the article will be returned to the author.
The first page should state:
Title of the article: approximately 15 words, no abbreviations should be used.
Authors' identification: the form of presentation of the authors' names is the authors' responsibility.
Only one institutional and one academic affiliation should be included per author, including city and country.
Each author should indicate his/her highest academic degree obtained.
ORCID code of each of the authors (https://orcid.org/)
Name, address, telephone numbers and e-mail address of the author to whom correspondence will be addressed.
In addition, authors should explicitly state the following: - Authors' contribution - Sources of funding (if applicable) - Conflicts of interest - Correspondence.
Text format Articles should be submitted in Spanish or English, in Word format, with a font size of no less than 11 on A4 paper size, single-spaced, Arial. Tables and figures should be included after the bibliographical references in editable format (not images).
Citations and Bibliographical References
Citations and references are made according to APA 7th edition.
Sections of the journal
Articles submitted to Revista Innovacion Empresarial should belong to one of the following sections.
Editorial: They are submitted at the request of the Director of the journal. Its content may be oriented to articles published in the same issue of the journal or will deal with a topic of interest according to the editorial policy. The maximum length is 1500 words and 7 bibliographical references.
Original Article: It is an unpublished research work on a subject related to the scientific, technical, humanistic or ethical field of the social sciences and humanities. It must have the following structure: abstract, keywords, introduction, materials and methods, results, discussion, and bibliographical references. The maximum length is 250 words for the abstract, 3500 words for the content, 6 tables or figures and 30 bibliographical references. Additionally, in the original article, the following should be taken into account.
Abstract/Abstract: It should be structured as follows: the Objectives of the study (what the study seeks to determine), the methods (design of the study),
Results (only the main ones) and the most important Conclusions. If it is written in Spanish, it should have the respective translation into English or vice versa. The maximum length is 250 words.
Key words/Keywords: A minimum of three and a maximum of five should be proposed, in Spanish and English, in accordance with the UNESCO thesaurus or other similar thesaurus.
Introduction: It includes a brief presentation of the current state of the problem, background, and justification of the study with its respective citation of the literature, without making an extensive review of the subject. It should not include data or conclusions of the work performed. The objectives should be stated in the last paragraph.
Methods: Describe the methodology used, so as to allow the reproduction of the study and the evaluation of the quality of the information. The type and design of the research, the characteristics of the population and the way the sample was selected will be described. Only detail the data collection techniques and instruments. For known techniques, indicate only the bibliographic reference. Mention the statistical procedures used. In all cases the decimal point should be used.
Results: Present the results clearly, without including opinions or subjective interpretations. The use of tables and figures is to complement the information; limit the number to the minimum necessary, following the APA model. The units of measurement should be according to the International System of Units. Photographs should be of the best possible resolution.
Discussion: It is recommended to consider the following aspects: main evidence of your study, contrast of the evidence with other studies, strengths and limitations, ending with conclusions and recommendations. Do not repeat data or information already presented in the introduction and results sections. Establish the nexus of the conclusions with the objectives of your study, refrain from making general statements and drawing conclusions that are not supported in the article.
Acknowledgements: When appropriate, it should be specifically mentioned to whom and for what type of collaboration in the research the acknowledgements are made.
Bibliographical references: It should have the bibliographical references that were previously cited in the content of the article according to the specifications mentioned in item 3 of General Aspects. Prioritize citations of scientific articles.
Letter to the Editor: It is a communication addressed to the Director or general editor of the Journal. Letters to the Editor will be accepted if they comply with the following considerations: Letters that make references to articles published preferably in the last two issues or with contributions referring to research carried out (maximum length of 1000 words, 1 figure or table, and 10 bibliographical references).
ETHICAL ASPECTS
The publications of Innovacion Empresarial Journal conform to the ethical standards stipulated by the International Committee on Ethics in Scientific Publications, whose recommendations are found in the Code of Conduct and Best Practice Guidelines for Journal Editors. This information is available at: http://publicationethics.org.
The INNOVACIÓN EMPRESARIAL Journal has a policy for detecting ethical misconduct in publication such as: plagiarism, fictitious authorship, changes in authorship, redundant publication, manipulation of data, and undisclosed conflict of interest. In case of detecting any ethical misconduct in publication, the article will be rejected or retracted and the measures recommended by the International Committee on Ethics in Scientific Publications will be taken, which includes informing the author, the other authors, the institution where he/she belongs, his/her superiors, the funding source entity, the ethics committee of his/her institution, the University of Huánuco, other scientific journals and other authorities about the misconduct.
AUTHORSHIP CRITERIA
We prefer collaborations with a maximum of six authors and only with a larger number when the complexity of the document justifies the collaboration of more participants, in this case it is required to verify with pertinent documentation that the article is the product of a group research project.
Once the work has been submitted, it will not be possible to make changes in the order or number of authors, so all questions related to authorship must be resolved before submitting the manuscript for the first time.
Proofing
The proof of printing is a stage of the editorial process after the layout and editing of the article to be published. A proof will be sent to the author in PDF format. It will be carefully reviewed and corrections and/or approval of the manuscript will be sent within 48 hours. The Editorial Committee reserves the right to admit or not the corrections made by the author in the proof.
OTHER ISSUES
Declaration of assignment of authorship rights. Authors who submit articles to the Journal, at the time of sending the affidavit of authorship and authorization for publication of the article. In case of publication, the authors maintain their intellectual authorship rights of the articles, ceding the rights of first publication in any printed or electronic format of the Innovacion Empresarial Magazine.
This publication will be subject to the Creative Commons Acknowledgement License that allows third parties to share the work as long as its author and first publication in this journal are indicated.
Authors may adopt the journal's Self-Archiving Policy. The statements, judgments and opinions expressed in the published articles correspond to the authors and not necessarily to the Editorial Board of the Journal.
|
|
|
Contáctenos Dirección: Jr. Progreso nro. 650 Huánuco, Huánuco, Huánuco Contacto: revistainnovacionempresarial@udh.edu.pe ISSN: 2810-8507(en línea) DOI: 10.37711/rcie |
|
|
Los artículos publicados se encuentran disponibles en acceso abierto bajo la licencia Creative Commons Attribution 4.0 International License